Selecting An Answering Machine; Activating/Deactivating The Answering Machine - Gigaset SX100 isdn Instructions Manual

Using the answering machine (on SX150isdn)

Selecting an answering machine

v
s
Answering mach.
s
AM1
~
OK
The answering machine list AM1 ,... is also opened, when you hold down the 1 key.
The list only contains the answering machine shown for the handset. If only one
answering machine can be reached by the handset or only one answering machine is
shown, the list is skipped over.
If the answering machine menu has not been opened and instead the message "No AM
allocated" is displayed, then you cannot use the answering machine directly with the
handset (page 75). If necessary, change the assignment of the incoming MSNs
(page 118) or use the answering machine via remote operation (page 86).

Activating/deactivating the answering machine

You can only activate/deactivate an answering machine when time control is not active
(page 93).
Prerequisite: You have selected an answering machine (page 76).
either ...
s
Activate?
or ...
s
Deactivate?
When activating, the remaining memory time (in %) is shown on the display.
The AB mode the answering machine is in after activating (recording or announce only
mode), depends on the announcement selected (page 77).
You can only activate an answering machine in recording mode if there is still memory
available. When the remaining memory is less than 60 seconds, you are prompted to
delete old messages. When the remaining memory is less than 10 seconds, the
answering machine is started in announce only mode.
If one of the answering machines assigned to the handset is activated, the icon × is
shown in the display. The icon × flashes when the machine is recording.
76
Open the menu.
Select the menu item and confirm.
OK
If necessary, select and confirm the answering
OK
machine, e.g. AM1 .
If AB block is set (page 93): Enter the answering
machine PIN and confirm.
Activate the answering machine:
Select the menu item and confirm.
OK
Deactivate the answering machine:
Select the menu item and confirm.
OK