Forwarding An Incoming Call - Cd (Call Deflection) - Gigaset SX100 isdn Instructions Manual

Functions during a call
Conference switching
Prerequisite: You have established an enquiry call (page 27 or page 28).
There is an active connection (the one established with the enquiry call) and one on
hold (the first). In conference switching, you speak with both parties at the same time.
You can establish conference switching with
i
two external parties or
◆
with one internal party and an external party.
◆
Two conference switchings can be made at the same time on one base.
Setting up a conference call
You are making an enquiry call. The first party is on hold.
Press the display key
Ending a conference call
There are many ways to end a conference call:
either ...
a
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
INDIV.
Forwarding an incoming call – CD (Call Deflection)
CD enables an incoming call to be forwarded to any phone number while it is ringing,
without having to answer the call.
You can pre-set a forwarding destination (page 125), dial a phone number from the
directory or enter a new number.
v
s
Forward
30
to establish conference switching.
CONF.
You end the conference call:
Hold down (return to idle status).
You change the conference call to an enquiry call:
Press the display key to change the conference
switching to an enquiry call (page 27 or page 28).
The connection that was active right before
establishing the conference call is made active
again.
Open the menu.
Select the menu item and confirm.
OK
The pre-set forwarding destination is dialled.