Setting the system
Restoring the factory settings
You can select which type of reset should be performed:
Operational – All MSNs and access codes (outside line code) are deleted and the AB
(answering machine) PIN (only for Gigaset SX150isdn) is set to 0000. The
authorisations are reset to "dial and answer".
Reset all – All functions are reset to their factory defaults. The system PIN is reset to
"0000". All entries (calls list, charges) are deleted.
The following applies to both functions: Before resetting, switch all active
i
call forwardings off! The handsets remain registered.
v
s
Base Settings
s
Settings
~
OK
s
System settings
s
Spec. function
s
Factory setting
either ...
s
Operational
or ...
s
Reset all
Checking the status
The status of the following settings can be checked:
Ringback
◆
Unknown call
◆
Forwarding
◆
External connections
◆
AB1, AB2, AB3
◆
v
s
Base Settings
s
Status
132
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Restore the functionality:
Select the menu item and confirm.
OK
Restore factory settings:
Select the menu item and confirm.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm. The status list is
OK
‰
displayed (
= is activated).