Pre-Assigning The Call Deflection Destination - Cd (Call Deflection) - Gigaset SX100 isdn Instructions Manual

Switching external call forwarding internal/external
Your ISDN connection offers you two simultaneously usable telephone lines (B
channels).
You can set up your telephone so that:
the call forwarding is done at the telephone exchange (external), so that your
◆
second ISDN line remains free.
the call forwarding is done in your base (internal), so that both ISDN lines are used.
◆
Any resulting connection charges will be charged to you.
By factory default, Forward. netw. is activated.
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
either ...
s
Forward. base
or ...
s
Forward. netw.
Pre-assigning the call deflection destination – CD (Call Deflection)
The call forwarding destination for incoming calls are pre-set here. This 'call to' number
is offered as a pre-set when forwarding manually (page 30).
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
s
Forward. dest.
~
Í
s
Save entry
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Select the menu item and confirm (
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter 'call to' number and confirm.
Select the menu item and confirm.
OK
Setting the system
‰
= set).
‰
= set).
125