Manual Registration: Gigaset C 1 On Gigaset C 100 Or C 150; Manual Registration; Gigaset 1000 To 4000 And Other Handsets With Gap Functionality - Gigaset C 100 User Manual

Registering and de-registering handsets

Manual registration: Gigaset C 1 on Gigaset C 100 or C 150

You must initiate handset registration on the handset and on the base.
1. On the handset
[______________]
MENU
[__________] [_____________________________________________________________]
Handset Settings
[__________] [_____________________________________________________________]
Register Handset
[_______]
OK
Base 1 flashes in the display when the system PIN has been entered.
2. On the base
The base search is cancelled after 60 seconds. If registration has not completed inside
this time, repeat the process.
When registration is successful, the handset is automatically assigned the lowest unas-
signed number, as described in the chapter 'Automatic Registration' (page 55).

Manual registration:

Gigaset 1000 to 4000 and other handsets with GAP functionality

This section describes how to connect handsets belonging to the Gigaset families, hand-
sets A 2, C 2, S 1 or handsets of other devices with GAP functionality to your C 100/C
150 .
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
The next unassigned internal number (1–6) is automatically assigned to the handset as
it is registered. If all the numbers have been assigned, number 6 is overwritten provided
the handset is in idle status.
56
Press the display key to open the menu.
Select the menu item and confirm.
[_________ ]
OK
Select the menu item and confirm.
[_________ ]
OK
Enter the system PIN of the base
(the default is 0000) and confirm.
Press the Registration/Paging key on the base
(page 42) until you hear a signal tone (C 150 only)
(approx. 3 sec.). Registration is initiated.
Press the Registration/Paging key on the base
(page 42) until you hear a signal tone (C 150 only)
(approx. 3 sec.).. Registration is initiated.