Registering/De-Registering Handsets; Automatic Registration; Manual Registration - Gigaset C2 Operating Manual

Registering/de-registering handsets

Registering/de-registering handsets
On some bases, your Gigaset C1 or C2 handset is registered automatically. In any event,
you can register your Gigaset C1 or C2 handset manually.
Your C2 Gigaset handset can be registered on up to four bases.

Automatic registration

at the base:
CX100isdn
To register for the first time, place the deactivated handset in the base with the display
facing upwards. The registration procedure takes about 1 minute. The handset auto-
matically receives the lowest free internal number from the range Int.11 to Int.16.
If all the internal numbers for wireless terminals have already been assigned on your
phone, please de-register another handset that you no longer require before registering
a new one (page 15).

Manual registration

If all the internal numbers for wireless terminals have already been assigned on your
phone, please de-register another handset that you no longer require before registering
a new one (page 15).
You must initiate handset registration on the handset and on the base.
1. Preparing the base for registration (see operating instructions for the base).
2. On the handset (within 30 sec.)
MENU
s
Handset Settings
s
Register Handset
s
Base 1
~
OK
s
Int.11
After registration the handset reverts to idle status.
The handset interrupts the base search after 60 seconds. If registration
i
has not been completed within this time, repeat the procedure.
14
CX150isdn SX100isdn
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e. g. Base 1.
OK
Enter system PIN of the base (set at the factory:
0000) and confirm. Registering appears in the dis-
play along with the name of the base
e. g. Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
Select internal number and confirm, e. g. Int.11.
OK
SX150isdn