Setting Up An Internal Group Call Group; Setting Up Ring Delay - Gigaset SX100 isdn Instructions Manual

Setting up an internal group call group

You can make a group call from any handset to all other registered internal party
(page 21).
In the basic settings, all registered parties of device type "telephone" or "Neutral" are set
up in the group call group.
v
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
v
s
Hunt group

Setting up ring delay

Ring delay can be used to individually set up a party per incoming MSN to ring later.
During this ring delay time, the handset can take the call using the function "Accept?"
without hearing a ring. The ring delay time is given in rings. There are 5 seconds
between rings.
The factory default setting is 0 rings (= not activated).
Take into account the reaction time of the answering machine when making this setting
(factory default: Automatic 2/4). If the set ring delay is longer than the setting for an
active answering machine, the phone will not ring, because the answering machine will
answer it first.
For each programmed MSN, at least one party must be able to be called immediately.
Therefore, a party set up for ring delay will be called immediately if he is the only one
on this incoming MSN, or no one else can be reached on this incoming MSN.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Confirm.
OK
Select the internal number, e.g., Int.11 .
Open the submenu.
Select the menu item and confirm (
OK
Setting the system
‰
= activated).
127