Individual Answering Machine Settings; Registering And De-Registering Handsets; Manual Registration - Gigaset A245 Manual

Individual answering machine
settings
The answering machine is supplied set up ready to
use. You can make individual settings from the
handset.
Set the number of rings
You can set how many times the telephone rings
before the answering machine is activated. You
can choose between two to nine rings and the
automatic call charge saving function.
With the automatic charge saving function (factory
default) the answering machine is activated after:
◆
2 rings: There are new messages.
◆ 4 rings: No new messages have been received.
The first ring from an outside call is suppressed on
the Gigaset, so when the answering machine is
accessed remotely it will activate after:
◆
3 rings: There are new messages.
◆
5 rings: No new messages have been received.
When operating the answering machine remotely
therefore, you can tell that if the telephone rings
four times there are no new messages – if you
hang up now there will be no call charges.
¢
MENU ANS MACHINE
¢ ¢
OK
Automatic (least cost function)
TIME SAVER
The answering machine is acti-
2 RINGS
vated after 2 rings. Up to
9 rings can be selected.
Message length and recording quality
You can set the maximum recording time and the
recording quality of your answering machine. The
choice of recording quality will affect the total
recording time.
¢
MENU ANS MACHINE
¢
SET OK.
Select the menu item and con-
MSG LENGTH
firm.
Select standard ("LONG PLAY")
QUALITY
or high quality ("HIGHQUAL-
ITY") and confirm.
Setting a different language
You can change the language used for voice
prompts and the pre-recorded announcement.
¢
N O 2
(starts the procedure).
MENU
1
Select a language: (English),
I
(Arabian). Press
OK
¢ ¢
OK RING DELAY
¢ ¢
OK MESSAGE
2
(French) or
to confirm.
6
Registering and de-registering
handsets
You can register up to four handsets on your base
station.

Manual registration:

Gigaset handset A24
1. On the handset:
enter your system PIN (default is 0000)
The display shows
tration procedure.
2. On the base: Within 60 sec. of entering the sys-
tem PIN, press the register/paging key at the rear of
the base (page 2) and hold for approx. 3 seconds.
The registration process lasts about a minute, with
several icons flashing in the display. The handset is
automatically assigned the next available internal
number (1–4). This number appears in the top left
of the display after successful registering, e.g. "2".
If all of the internal numbers 1 to 4 are used up
(i.e. four handsets have been registered), handset
number 4 is de-registered and overwritten.
Manual registering: Other handsets
Other handsets are registered as follows:
1. On the handset: Start to register your handset
as described in its operating instructions.
2. On the base: Press the register/paging key at the
rear of the base (page 2) and hold for approx.
3 seconds. The registration process starts.
A 3 1 0 0 8 - M1 6 4 4 - R 1 0 1 - 2 - 7 6 1 9
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2004
All rights reserved. Subject to availability.
Right of modification reserved.
Printed in Germany. Siemens Aktiengesellschaft
http://www.siemens.com.
¢
MENU REGISTER HS ¢
during the regis-
REGISTER HS
¢
.
OK