Making Single-Sided Copy From Double-Sided Originals (2S1) - Konica Minolta 7045 Instruction Manual

Making Single-Sided Copy from Double-Sided Originals (2s1)

Use RADF and select 2s1 copy mode to make single-sided copies from double-
sided originals.
2-1 Copying
Double-sided original
1
x z
Touch
highlight it.
2
Select additional copy conditions, as
desired.
3
Enter the desired print quantity from
the control panel keypad.
4
Position originals FACE UP in the docu-
ment feeder.
5
Press
START
The machine starts to scan originals, then to print
simplex copies when ready for output.
CAUTION
When the finisher / paper exit tray capacity is
exceeded due to the print quantity selected, re-
move the copied sets as they exit; otherwise,
mishandled paper will occur.
on the Basic Screen to
.
7045
7045
7045
7045
7045
Simplex copy
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
AUTO RESET
Some incompatible conditions
may automatically release the
selected copy mode.
In this case, arrange all the
settings to be compatible with
the selected copy mode.
HINTS
See p. 3-6 for details on set-
ting print quantity.
HINTS
• See p. 3-2 to p. 3-4 for de-
tails on positioning originals.
• Use RADF store mode (p. 3-
20 to p. 3-21) when the origi-
nal count exceeds 50.
Press to suspend the
STOP/CLEAR
scanning or printing job.
3
Copying
Operations
Positioning
Originals
Setting
Print Quantity
Paper Size
Lens Mode
Density
.
1s2, 2s2
2s1
Using
Memory
Output without
Finisher
FS-109
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-19