Erasing Outside Of The Original (Non-Image Area Erase) - Konica Minolta BIZHUB PRO C500 User Manual

Erasing Outside of the Original (Non-Image Area Erase)

Erasing Outside of the Original (Non-Image
Area Erase)
The Non-image area erase mode is used to copy non standard or special originals,
such as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the
platen glass. The exposed glass area outside the borders of the original will not be
copied.
Specifications for Non-Image Area Erase
/ Use the platen glass only. Keep RADF open throughout the procedure.
/ Incompatible Conditions: Using RADF, 2)2, 2)1, APS, AMS, Rotation,
Rotation Sort, Rotation Group, Fold/Stitch&Fold/Trimming (with Booklet
selected), Mixed Original, Z-Folded Original, Tab Paper, Sheet/Cover
Insertion, Chapter, Combination, Booklet, Image Insert, Dual Page in RADF
Store mode, Multi-Page Enlargement, Reverse Image, Reduce & Shift in
Image Shift, Storing Image in Overlay Memory
1. Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2. Touch Non-image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
10-34
General copying
Set original
Non-Image Area Erase