Test Access - Xerox 4250 - WorkCentre - Copier System Administration Manual

DNSv6
14. Enter a valid [IPv6 Domain Name].
15. Enter an IP address for the [Primary DNSv6 Server Address]. Enter an IP address for
[Secondary DNSv6 Server Address].
16. Check the box to enable [Dynamic DNSv6 Registration].
NOTE:
DDNS.
17. Scroll down the page and click on the [Apply] button to save the changes.

Test Access

1. At your Workstation, open the Web browser, In the TCP/IP Address bar, enter "http://"
followed by the Internet address of the machine. Then press the <Enter> key on the
keyboard.
If you use the domain name to specify the machine, use the following format.
If you use the IP address to specify the machine, use one of the following formats
depending on your machine configuration. The IPv6 format is supported on Windows
Vista only. An IPv6 address needs to be enclosed in square brackets.
NOTE:
the number to the Internet address as follows. In the following examples, the port number
is 8080.
2. Verify that the home page of CentreWare Internet Services is displayed.
The CentreWare Internet Services installation process is now completed.
NOTE:
passcode (if one is set up).
NOTE:
followed by the Internet address, instead of "http://".
DHCP/DDNS:
•
Xerox WorkCentre 4250/4260 Series System Administration Guide
If your DNS Server does not support dynamic updates there is no need to enable
http://myhost.example.com
IPv4: http://xxx.xxx.xxx.xxx
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]
If you have changed the port number from the default port number "80", append
Domain name: http://myhost.example.com:8080
IPv4: http://xxx.xxx.xxx.xxx:8080
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]:8080
If the Accounting feature is enabled, you may be required to enter a user ID and
When your access to CentreWare Internet Services is encrypted, enter "https://"
Release Registration – Allows DHCP resources to be released when the machine is
powering down. This is a display-only item and shows "Enabled".
TCP/IP
19