Navigating To A Saved Waypoint; Stop Navigating To A Waypoint - Standard Horizon HX851E Owner's Manual

12.6 NAVIGATING TO A SAVED WAYPOINT

1. Press and hold down the [ CALL ( ENT ) MENU ]
key until "Setup Menu" appears.
2. Press the [ ] / [ ] key to select "Radio Setup".
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Display" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key, and select
"Waypoint" with the [ ] / [ ] key.
5. Press the [ CALL ( ENT ) MENU ] key.
6. Select the waypoint name and press the
[ CALL ( ENT ) MENU ] key to show the waypoint
data display.
7. Press the [ CALL ( ENT ) MENU ] key to start navi-
gating the the waypoint and show the Waypoint Nav
display.

12.7 STOP NAVIGATING TO A WAYPOINT

To stop navigating to a waypoint, the radio must be switched to Normal Mode
with the following procedure.
1. Press and hold down the [ CALL ( ENT ) MENU ] key until
"Setup Menu" appears.
2. Press the [ ] / [ ] key to select "Radio Setup".
3. Press the [ CALL ( ENT ) MENU ] key, then select "Display"
with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key, and select "Radio",
"Position", "Navigation" or "Compass" other than
"Waypoint", and press the [ CALL ( ENT ) MENU ] key.
Page 80 HX851E