Channel Name - Standard Horizon HX851E Owner's Manual

8.10 CHANNEL NAME

This selection allows you to customize the name of a channel from the default
name.
Example: CH69 PLEASURE to HOOKUP
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ CALL ( ENT ) MENU ] key, then select "CH
Name" in the "Radio Setup" menu with the [ ] / [ ] key.
3. Press the [ CALL ( ENT ) MENU ] key.
4. Press the [
named (In this case, select to "69") and press the
[ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to scroll through the alphabet
and 0 - 9. Enter the first letter of channel name.
6. Press the [ CALL ( ENT ) MENU ] key to enter the desired
letter and move the cursor one space to the right.
7. Repeat the procedure until the name is complete. The
name can consist of up to 11 characters. If you do not
use all 11 characters, press the [ CALL ( ENT ) MENU ]
key to move to the next space. This method can also
be used to enter a blank space in the name. To clear
the previous letter, press the [ CLR ] key.
8. If a mistake was made entering repeatedly press the
[ H/L ( )] key until the wrong character is selected,
then press the [ ] / [ ] key to correct the entry.
9. Press and hold down the [ CALL ( ENT ) MENU ] key to
enter the name.
10. If you want to enter the name of another channel, repeat steps 4 through 9.
11. To exit this menu and return to radio operation mode press the [ 16/9 ] key
or press the [ CLR ] key several times.
HX851E
] / [ ] key to select the channel to be
Page 65