Standard Horizon HX851E Owner's Manual page 27

6. To DELETE a channel from the list, select the channel then press the
[ CALL ( ENT ) MENU ] key. "MEM" icon disappears from the display.
7. When you have completed your selection, press the [ 16/9 ] key or press
the [ CLR ] several times to return to radio operation.
6.8.3 MEMORY SCANNING ( M-SCAN )
1. Press the [ SQL ] key to activate the squelch adjusting mode, then press
the [ ] / [ ] key until the background noise disappears.
2. Press the [ SCAN ( DW )] key, the "
ning will proceed from the lowest to the highest pro-
grammed channel number and Preset channel (de-
scribed in the next chapter) and will stop on a channel
when a transmission is received.
3. The channel number will blink during reception.
4. To stop scanning, press the [ 16/9 ] or [ CLR ] key.
6.8.4 PRIORITY SCANNING ( P-SCAN )
The "Priority Scan" allows the radio to "Memory Scan" while also keeping watch
on a particularly important "Priority Channel". In the default setting, Channel
16 is set as the priority channel. You may change the priority channel to the
desired channel from Channel 16 by the "Radio Setup" menu, refer to section
"8.5 PRIORITY CHANNEL".
1. Press the [ SQL ] key to activate the squelch adjusting mode, then press
the [ ] / [ ] key until the background noise disappears.
2. Press the [ SCAN ( DW )] key, the "
ning will proceed between the memorized channels and
Preset channel (described in next chapter) and the
priority channel. The priority channel will be scanned
after each programmed channel.
3. To stop scanning, press the [ 16/9 ] or [ CLR ] key.
HX851E
" icon appears on the display. Scan-
" icon appears on the display. Scan-
Page 27