Power Save Mode - Standard Horizon HX851E Owner's Manual

10.2 POWER SAVE MODE

This selection selects the Battery Save Mode for the internal GPS unit. The
default setting for the Power Save Mode is "Level 1".
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "GPS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Power Save Mode" in the "GPS Setup" menu with the
[ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select the desired level.
GPS Signals are always being received.
Off:
Level 1: Activates the GPS receiver for 0.4 sec-
onds every 5 seconds.
Level 2: Activates the GPS receiver for 50 seconds
every 1 minute.
Level 3: Activates the GPS receiver for 50 seconds every 3 minutes.
Level 4: Activates the GPS receiver for 50 seconds every 5 minutes.
6. Press the [ CALL ( ENT ) MENU ] key to store the selected level.
7. To exit this menu and return to radio operation mode press the [ 16/9 ] key
or press the [ CLR ] key several times.
When Navigation or the GPS Status page is selected in the Radio Setup
menu (refer to secton "8.1 DISPLAY"), the GPS receiver will be auto-
matically set to Level 1.
HX851E
NOTE
Page 69