Position Report - Standard Horizon HX851E Owner's Manual

7.9 POSITION REPORT

The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel.
To transmit a Position Send Call, you must setup the HX851E DSC Indi-
vidual / Position Call Directory with the name of the vessel(s) or person
and the MMSI of the DSC radio you wish to send your position to. To
setup this directory refer to section "7.5.1 SETTING UP THE INDIVIDUAL
/ POSITION CALL DIRECTORY".
7.9.1 SETTING UP A POSITION REPORT RINGER
The HX851E has the capability to turn off the Position Report ringer.
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "DSC Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"DSC Beep" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key, then select
"Position Report" with the [ ] / [ ] key.
5. Press the [ CALL ( ENT ) MENU ] key, then press
the [ ] key to select "Off".
6. Press the [ CALL ( ENT ) MENU ] key to store the
selected setting.
7. Press the [ CLR ] key twice to return to the "Setup
Menu", then press the [ CLR ] key again to return to ra-
dio operation.
To return to enabling the ringer tone, repeat the above procedure, press the
[ ] key to select "On" in step "5" above.
HX851E
NOTE
Page 55