12.8 WAYPOINT SETUP
12.8.1 DISTANCE UNIT
Allows Waypoint display to be shown in "Nautical Mile", "Statue Mile"or "Kilo-
Meter" for distance.
1. Press and hold down the [ CALL ( ENT ) MENU ]
key until "Setup Menu" appears.
2. Press the [ ] / [ ] key to select "Waypoint Setup".
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Distance Unit" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select desired unit. Avail-
able selections are NM (Nautical Mile), SM (Mile) or
KM (Kilo-Meter) for distance.
6. Press the [ CALL ( ENT ) MENU ] key to store the selected
setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ] key several
times.
12.8.2 DISPLAY RANGE
This menu item allows setting of the range rings on the display. The default
setting is "Auto".
1. Press and hold down the [ CALL ( ENT ) MENU ]
key until "Setup Menu" appears.
2. Press the [ ] / [ ] key to select "Waypoint Setup".
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Display Range" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select desired Range. Avail-
able selections are Auto (Auto change), 2, 4, 8, 10, 15,
20, 30, 40 or 50.
6. Press the [ CALL ( ENT ) MENU ] key to store the selected
setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ] key several
times.
HX851E
Page 81