International, Usa, And Canada Channels; Simplex/Duplex Channel Use - Standard Horizon HX851E Owner's Manual

Floating marine transceiver with gps
Table of Contents

Advertisement

When the "GPS Status" mode is selected in step "4" above, the display
will show the "GPS Status" page until a key is pressed.
You may customize the various functions of the HX851E internal GPS unit for
your operating requirements via the "GPS Setup" menu. Refer to section
"10 GPS SETUP" for details.
"R
" M
6.6 INTERNATIONAL, USA, AND CANADIAN CHANNELS ( UK version only )
1. To change from International Marine Channel to Canadian or USA Marine
Channels, hold down the [ 16/9 ] key and press the [ CLR ] key. The band will
change from International, to Canadian, and to USA with each press.
2. "
" appears on the LCD for the International band, "
for the Canadian band, and "
"I

6.7 SIMPLEX/DUPLEX CHANNEL USE

Refer to the VHF MARINE CHANNEL CHART (page 86) for instructions on
use of simplex and duplex channels.
All channels are factory-programmed in accordance with International,
Industry Canada, and FCC (USA) regulations. The mode of operation
cannot be altered from simplex to duplex or vice-versa. Simplex (ship to
ship) or duplex (marine operator) mode is automatically activated, de-
pending on the channel and whether the International, Canadian, or
USA operating band is selected.
HX851E
NOTE
"P
" M
"W
" M
" B
"C
NOTE
"N
" M
"GPS S
" M
" appears for the USA band.
" B
"C
" M
" appears
"USA" B
Page 25

Advertisement

Table of Contents
loading

Table of Contents