Time Display; Time Format - Standard Horizon HX851E Owner's Manual

10.6 TIME DISPLAY

Allows the time shown on the display to be shown in local (with offset inputted
in section "10.5 TIME OFFSET") or UTC time. The default setting is "UTC".
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "GPS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Time Display" in the "GPS Setup" menu with the [ ] /
[ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "UTC" or "Lo-
cal".
6. Press the [ CALL ( ENT ) MENU ] key to store the
selected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ] key several
times.

10.7 TIME FORMAT

Allows the time shown on the display to be shown in 12 hours or 24 hours time
formats. The default setting is "12 hours".
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "GPS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Time Format" in the "GPS Setup" menu with the [ ] /
[ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "24H" or "12H".
6. Press the [ CALL ( ENT ) MENU ] key to store the
selected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ] key several
times.
Page 72 HX851E