8.4 LAMP
This menu selection is used to setup the illumination time of the display and
keypad. The default setting is "5 Seconds".
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ CALL ( ENT ) MENU ] key, then select "Lamp"
in the "Radio Setup" menu with the [ ] / [ ] key.
3. Press the [ CALL ( ENT ) MENU ] key.
4. Press the [ ] / [ ] key to select the desired time.
Continuous: Illuminates the display/keypad continu-
1/2/3/4/5/6/8/10/12/15/20/25/30 Seconds:
Off:
5. Press the [ CALL ( ENT ) MENU ] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [ 16/9 ] key
or press the [ CLR ] key several times.
8.5 PRIORITY CHANNEL
Allows selection of the priority channel when priority scan is enabled. The de-
fault setting is "Channel 16".
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ CALL ( ENT ) MENU ] key, then select "Prior-
ity CH" in the "Radio Setup" menu with the [ ] / [ ] key.
3. Press the [ CALL ( ENT ) MENU ] key.
4. Press the [ ] / [ ] key to select the desired channel to
be a priority.
5. Press the [ CALL ( ENT ) MENU ] key to store the selected
setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ] key several
times.
Page 62
ously.
Illuminates the display/keypad for the se-
lected time when press any key (except
the PTT switch).
Disables the display/keypad lamp illumination.
HX851E