Led Setup - Standard Horizon HX851E Owner's Manual

8.11 LED SETUP

Allows setting up the TX/BUSY LED mode. The default setting is "Continu-
ous".
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ CALL ( ENT ) MENU ] key, then select "LED
Setup" in the "Radio Setup" menu with the [ ] / [ ] key.
3. Press the [ CALL ( ENT ) MENU ] key.
4. Press the [ ] / [ ] key to select the LED to be changed
and press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "On" or "Off" for the
Transmit LED, Receive LED and Water Hazard LED,
or "Continuous", "SOS", "Blink1", or "Blink2" for the Emer-
gency LED.
Continuous: The BUSY/TX lamp glows continuously in
SOS:
Blink1:
Blink2:
6. Press the [ CALL ( ENT ) MENU ] key to store the selected setting.
7. To exit this menu and return to radio operation mode press the [ 16/9 ] key
or press the [ CLR ] key several times.
When the HX851E is immersed in water the SOS strobe light will start
blinking. This allows you to be able to see the radio that may have fallen
overboard at night or when worn on a life vest aid in rescuing a person
in the water.
Page 66
white when the Emergency function is en-
gaged
The BUSY/TX lamp flashes according to
the "S.O.S" Morse Code ( ... --- ... ) when the Emergency func-
tion is engaged. This is the default setting.
The BUSY/TX lamp flashes rapidly when the Emergency func-
tion is engaged.
The BUSY/TX lamp flashes slowly when the Emergency func-
tion is engaged.
WATER STROBE NOTE
HX851E