Dual Watch; Preset Channels 0 ~ 9 : Instant Access - Standard Horizon HX851E Owner's Manual

6.9 DUAL WATCH

The Dual Watch feature allows the radio watch the particularly important "Pri-
ority Channel" (determined section "6.8.4 PRIORTY SCANNING ( P-SCAN ) ")
and one other channel.
1. Select the desired channel using the [ ] or [ ] key.
2. Press and hold the [ SCAN ( DW )] key until "
display ( : Priority channel number).
Note: TW stands for Tri-Watch. it is shown to alert you
the radio is actually watching the priority channel, the
working channel and CH70, the DSC channel.
3. When a transmission is received on the "Priority Channel", the radio will
stay on the Priority channel until the incoming signal disappears.
4. The Dual Watch feature will resume when the incoming signal disappears
at the end of the transmission.
5. Press the [ SCAN ( DW )] key or [ CLR ] key to stop the Dual Watch feature
and return to normal operation.

6.10 PRESET CHANNELS 0 ~ 9 : INSTANT ACCESS

10 Preset Channels can be programmed for instant access. Pressing the [ PRE-
SET ] key activates the user assigned channel bank. If the [ PRESET ] key is
pressed and no channels have been assigned, an alert beep will be emitted
from the speaker.
6.10.1 PROGRAMMING
1. Press the [ ] / [ ] key to select a channel to be
programmed.
2. Press and hold the [ PRESET ] key until the pre-
set channel number "
icon are displayed.
3. Release the [ PRESET ] key. The preset channel num-
ber "
4. Repeat steps 2 and 3 to program the desired channels into the PRESET
memory.
5. To delete a Preset Channel: press the [ PRESET ] key numerous times until
the channel the preset channel you want to delete is shown on the display.
Press and hold the [ PRESET ] key until "
display.
Page 28
" will disappear from the display after a few second.
" and a " "
" icon is shown on the
" icon is removed from the
HX851E