Scan Type; Scan Memory - Standard Horizon HX851E Owner's Manual

8.6 SCAN TYPE

This selection is used to select the scan mode between "Memory Scan" and
"Priority Scan." The default setting is "Priority SCAN".
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ CALL ( ENT ) MENU ] key, then select "SCAN
Type" in the "Radio Setup" menu with the [ ] / [ ] key.
3. Press the [ CALL ( ENT ) MENU ] key.
4. Press the [
"Memory SCAN".
5. Press the [ CALL ( ENT ) MENU ] key to store the selected
setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ] key several
times.

8.7 SCAN MEMORY

To be able to scan channels the radio must be programmed. This section al-
lows channels to be stored in scan memory.
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ CALL ( ENT ) MENU ] key, then select "SCAN
Memory" in the "Radio Setup" menu with the [ ] / [ ]
key.
3. Press the [ CALL ( ENT ) MENU ] key.
4. Press the [ ] / [ ] key to select a desired channel to
be scanned, the press the [ CALL ( ENT ) MENU ] key.
"MEM" icon appears on the dispaly, which indicates
the channel has been selected to the scan channel.
6. Repeat step 4 for all the desired channels to be
scanned.
7. To DELETE a channel from the list, select the channel
then press the [ CALL ( ENT ) MENU ] key. "MEM" icon
disappears from the display.
8. When you have completed your selection, press the [ 16/9 ] key or press
the [ CLR ] several times to return to radio operation.
HX851E
] / [ ] key to select "Priority SCAN" or
Page 63