Standard Horizon HX851E Owner's Manual page 56

7.9.2 TRANSMITTING A DSC POSITION REPORT CALL
Pre-Programmable Calling
1. Press the [ CALL ( ENT ) MENU ] key. The "DSC Call
Menu" will appear in the display.
2. Press the [ ] / [
port".
3. Press [ CALL ( ENT ) MENU ] key to show the "POS Re-
port Call" Directory. This directory uses the "Indi-
vidual Call" Directory information.
4. Press the [ ] / [ ] key to select a name in the
directory, then press the [ CALL ( ENT ) MENU ]
key.
5. Press the [ CALL ( ENT ) MENU ] key again to send
your position to the selected vessel.
6. Press the [ CLR ] key to return to radio operation.
Manual Calling
You may enter an MMSI number manually to contact another vessel without
setting up the Individual / Position Call Directory.
1. Press the [ CALL ( ENT ) MENU ] key. The "DSC Call
Menu" will appear in the display.
2. Press the [ ] / [
port".
3. Press [ CALL ( ENT ) MENU ] key to show the "POS Re-
port Call" Directory. This directory uses the "Indi-
vidual Call" Directory information.
4. Press the [ ] / [ ] key to select "Manual", then
press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to scroll through num-
bers, 0-9. To enter the desired number and move
o n e s p a c e t o t h e r i g h t p r e s s t h e
[ CALL ( ENT ) MENU ] key.
6. Repeat this procedure until all nine spaces of
the MMSI number which you want to contact are
entered. If a mistake was made entering in the MMSI
number repeatedly press the [ H/L (
wrong number is selected, then press the [ ] / [ ] key to correct the entry.
Page 56
] key to select the "Pos Re-
] key to select the "Pos Re-
)] key until the
HX851E