Storing Waypoints - Standard Horizon HX851E Owner's Manual

12.2 STORING WAYPOINTS

1. Press and hold down the [ CALL ( ENT ) MENU ]
key until "Setup Menu" appears.
2. Press the [
menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Waypoint Directory" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Select "Add" with the [
[ CALL ( ENT ) MENU ] key.
6. Press the [ ] / [ ] key to select the first letter of
the Waypoint Name you want to reference in the
directory.
7. Press the [ CALL ( ENT ) MENU ] key to store the
first letter and to move to the second letter in the
name.
8. Repeat step 6 and 7 until the name is shown. Press the [ CALL ( ENT ) MENU ]
key to skip a letter if needed.
9. Press the [
latitude.
10. Enter the coordinates of the waypoint POSITION, by
pressing the [ ] / [ ] key to select the first digit in the
Latitude.
11. Press the [ CALL ( ENT ) MENU ] key to store the first
number and to move to the second number in the po-
sition.
12. Repeat step 10 and 11 until the latitude is shown in-
clude N or S in the last digit.
13. Press the [ CALL ( ENT ) MENU ] key until the first digit of
the Longitude is blinking.
14. Press the [ ] / [ ] key to select the first digit in the
Longitude.
15. Press the [ CALL ( ENT ) MENU ] key to store the first
number and to move to the second number in the po-
sition.
HX851E
] key to select "Waypoint Setup"
] / [
] / [ ] key to skip the ID: entry and to the first digit of the
] key, press the
Page 77