Storing Waypoints - Standard Horizon HX851 Owner's Manual

12.2 STORING WAYPOINTS

1. Press and hold down the
Menu" appears.
Menu Menu
Menu Menu
2. Press the
menu.
3. Press the
the /
4. Press the
5. Select "Add Add" with the
Add Add
Add
key.
6. Press the
of the Waypoint Name you want to reference in
the directory.
7. Press the
move to the second letter in the name.
8. Repeat step 6 and 7 until the name is shown.
Press the
9. Press the
latitude.
10. Enter the coordinates of the waypoint POSITION, by
pressing the
Latitude.
11. Press the
to the second number in the position.
12. Repeat step 10 and 11 until the latitude is shown in-
clude N or S in the last digit.
13. Press the
blinking.
14. Press the
Longitude.
15. Press the
to the second number in the position.
16. Repeat step 14 and 15 until the Latitude is shown include E or W in the last
digit.
17. If a mistake was made entering in the MMSI number
repeat pressing the
selected, then press the
entry.
18. After all information is entered, press and hold the
waypoint into memory.
Page 82
key to select "Waypoint Setup
key, then select "Waypoint Directory
key.
key.
/
/ key to select the first letter
key to store the first letter and to
key to skip a letter if needed.
/ key to skip the ID: entry and to the first digit of the
/ key to select the first digit in the
key to store the first number and to move
key until the first digit of the Longitude is
/ key to select the first digit in the
key to store the first number and to move
key until the wrong number is
/
key until "Setup
Setup Setup
Setup Setup
Waypoint Setup Waypoint Setup Waypoint Setup" Waypoint Setup
Waypoint Directory" with
Waypoint Directory Waypoint Directory
Waypoint Directory
key, press the
key to correct the
key to store the
HX851