Console Codes; Custom Codes - Stairmaster MOMENTUM C40 Owner's Manual

CONSOLE CODES

There are 5 groups of different codes; Customization [codes start with 3],
Machine Status [codes start with 4], Diagnostic [codes start with 6 or 7],
Configuration [codes start with 8], and Fitness Testing [codes start with 9]. The
first group of codes are customization codes and are used to set defaults such as
units, language, heart rate input type, etc. The second group of codes are
machine status codes and are used to track hours and other general usage
patterns for maintenance purposes. The third group of codes are diagnostic
codes and are used for troubleshooting. The following key actions are valid in
each group of console codes:
• Pressing [LEVEL ], [first number of code], [ENTER] displays what
group of codes is being accessed.
• Pressing [SELECT] or [LEVEL ] at that point allows you to view all
possible selections. Once in this mode pressing [LEVEL ] backs up
through the selections; pressing [ENTER] then selects that item. If
another test level is available at this point, the [SELECT] / [ENTER]
process is repeated.
• Pressing [ ] [first number of code], [second number of code], [ENTER ]
selects that item directly.
• Pressing [CLEAR] exits any of the special access modes.

Custom Codes

[ ^ ] [ 3 ] [ 0 ] Change workout time limit
[ ^ ] [ 3] [ 1 ] Change units
[ ^ ] [ 3 ] [ 2 ] Choose type of heart rate input
[ ^ ] [ 3 ] [ 3 ] - spare -
[ ^ ] [ 3 ] [ 4 ] Choose console language
[ ^ ] [ 3 ] [ 5 ] Change console contrast
[ ^ ] [ 3 ] [ 6 ] Change speed limit
[ ^ ] [ 3 ] [ 7 ] Turn clinical mode on or off
[ ^ ] [ 3 ] [ 8 ] - spare -
[ ^ ] [ 3 ] [ 9 ] Reset to factory defaults
MOMENTUM SYSTEMS CONSOLE
Spanish, Italian, Dutch, Swedish
Level 3, 20 min., 30:1 Gear Ratio, English
5 - 99 minutes, or
no time limit
USA or Metric
Telemetry or Hand
German, French,
Increase or decrease
Not applicable
used to allow RPMs
< 40
175 lbs., Intensity
Page 29