7000 PT CONSOLE
3. Press [CLEAR] to delete the last character displayed on the text bar. Press
[ENTER] to end the editing process.
4. To edit multiple characters at one time, press [9], [9], [ENTER] to erase all of
the characters to the right of the last character displayed on the text bar.
5. To erase the entire message, press [+ INCREASE], [1], [0], [5], [ENTER] while
in the ATTRACT mode.
6. The edited message will scroll across the text bar. If you have erased the
entire message, the text bar area will be blank during the ATTRACT mode.
7. Press [+ INCREASE], [2], [1], [2], [3], [ENTER] to display the default scrolling
message on the text bar.
8. Press [+ INCREASE], [2], [1], [2], [1], [ENTER] to display your custom scrolling
message on the text bar.
CONSOLE CODES
The console codes and the corresponding functions are listed in Table 4.
Press [+ INCREASE] before pressing the code's number keys, and then
press [ENTER]. Some codes, like the one to change the language of the
console prompts, have options that require you to press a number and then
[ENTER] to select that number.
CHANGING THE CONSOLE UNITS AND PROMPT LANGUAGE
The console is set at the manufacturing facility to English language prompts
and English units. While the console is in the ATTRACT mode, you can set the
console for foreign language prompts or metric units.
1. To change the prompt language, press [+ INCREASE], [7], [4], [2], [4],
[ENTER]. Press the code number for the desired language and then press
[ENTER].
2. To change the console to metric units, press [+ INCREASE], [9], [7], [6],
[0], [ENTER] and then [1]. Press [+ INCREASE], [9], [7], [6], [0], [ENTER], [0]
to change back to English units.
Page 20