SEAT POST (3400 CE)
1.
Unsnap the seat post cover cap from the frame by pulling up on the
bottom edges of the cover cap. Allow the seat post cover cap to rest
freely on the seat post.
2.
Rotate the seat handle counterclockwise to until it is unthreaded from
the seat.
3.
Remove the seat and seat slider from the seat post.
4.
Pull the seat adjustment knob out, lift the seat post up, and remove the
seat post from the frame.
5.
Reverse the steps to reinstall the seat post in the frame.
Washer
Seat handle
PARTS REMOVAL AND REPLACEMENT
Seat
Seat slider
Seat post
Spring clip
Seat post cover cap
Seat post end cap
Screw
Page 53