PARTS REMOVAL AND REPLACEMENT
SEAT HANDLE (3400 CE)
1.
Rotate the seat handle counterclockwise until it is unthreaded from the
seat. Remove the seat handle and washer from the seat slider.
2.
On the replacement handle, apply a thin layer of grease on the threads
from half way to the end of the threads. Install the washer on the
handle and thread the new handle halfway into the seat. Position the
seat in the desired location. Rotate the handle clockwise to secure the
seat.
3.
Ensure that the handle does not stick out to the right or left. The
handle is spring loaded so that you can properly align the frame and
the handle. Simply pull out on the handle and rotate it for correct
alignment.
SEAT TRACK (3800 RC)
1.
Remove the side covers and remove the seat assembly from the seat
track.
2.
Using a 5/16" allen wrench, loosen and remove the three screws and six
washers that fasten the seat track to the main frame. Remove the seat
track from the frame. Reverse the steps to reinstall the seat track.
Page 54