Maintaining The Transmitter Belt; Figure 4: Transmitter Belt - Stairmaster MOMENTUM C40 Owner's Manual

contact heart rate signals. If you do not see a heart rate on the console, try one
of the following:
•
•
•
•
•
•
•

Maintaining the Transmitter Belt

Clean the chest belt regularly with mild soap and water, then dry thoroughly -
residual sweat and moisture keep the transmitter active and drain the battery in
the transmitter. Do not use abrasives or chemicals such as steel wool or alcohol
for cleaning, as they can damage the electrodes permanently. You can order
replacement belts from StairMaster, Polar Electro, Inc., or your local fitness store:
StairMaster
Polar Electro, Inc.
Move closer to the console.
Tighten the elastic part of the chest belt.
Adjust the belt higher or lower on your chest.
Remoisten the electrodes.
Test your chest strap with a machine that you know is working,
or with a heart rate watch that you know is working.
If possible, replace or exchange your console with a console
(from the same type of machine) that you know is working and
retest the machine.
Verify that the console software has been set up properly for
heart rate detection (see pg. 12-13).

Figure 4: Transmitter Belt

800-331-3578
800-227-1314
TELEMETRY HEART RATE
P/N 64000
Page 15