Pci Board - NEC N8100- 1241F User Manual

9-44 Upgrading Your Server

PCI BOARD

The server has a riser card assembly on the mother board that enable installation of PCI boards. The
riser card assembly can hole up to two PCI boards.
Insert PCI boards for network extension and file device function extension into PCI board slots in
each riser card.
IMPORTANT:
The PCI board is extremely sensitive to static electricity. Make sure
to touch the metal frame of the server to discharge static electricity
from your body before handling the PCI board. Do not touch the
PCI board terminals or on-board parts by a bare hand or place the
PCI board directly on the desk. For static notes, see the section
"Anti-static Measures".
Some restrictions are imposed on the combination of PCI boards
which can be installed in the server. Contact your service
representative for details.
A riser card is designed for installing only low-profile PCI boards or
full-height PCI boards. Before installing a PCI board, make sure of
the card specification.
FRONT
(Dedicated to low-profile PCI boards)
Mother board
Riser card slot
Slot number: 1C
PCI riser module assembly
Riser card slot
(Dedicated to full-height PCI boards)
REAR
Riser card slot
(Dedicated to low-profile PCI boards)
Riser card slot
(Dedicated to full-height PCI boards)
Slot number: 1B