NEC N8100- 1241F User Manual page 299

SAS 2.5-Inch Hard disk drive models
Item
CPU Type
Clock/Cache
Standard
Maximum
Chipset
Memory Minimum
Maximum
Expansion unit
Expansion times
Memory module
Error check
Graphics (VRAM)
Auxiliary input Floppy disk (option)
device Hard disk (standard)
Hard disk (maximum)
DVD-ROM drive
Hard disk drive Interface
bay Slots
RAID
Hot-swap
Additional slot PCI EXPRESS (x8)
PCI-X (64-bit/100 MHz)
LAN interface
External Keyboard/mouse
interface USB
Serial
Network
Display
SCSI
Power supply
Fan
Cabinet design
External dimensions
Weight (Max.)
Power supply
Environment-al Temperature
requirements
Humidity
Others
* Excluding the front bezel.
NEC Express5800/120Rg-1
1245F 1331F
Intel Xeon processor
1.60GHz 2.00GHz/
/4MB 4MB
1
2
Intel 5000P (1066/1333 MHz)
2GB (1GB×2)
48GB (The standard DIMM must be replaced.)
2 DIMMs (512MB/1GB/2GB/4GB)
6 times
SDRAM DIMM (Low Profile DDR2-533
Buffered Type)
ECC
VRAM: 16MB
3.5-inch drive × 1 (USB)
None
879GB(146.5GB × 6)
DVD: x8 speed max.
CD: x24 speed max.
SAS
6
RoMB: RAID0/RAID1
Option: RAID0/RAID1/RAID5
Supported if the RAID system is configured.
1 slot (low-profile)
1 slot (full-height)
1000Base-T/100Base-TX/10Base-T (2 ports)
100Base-TX/10Base-T (1 port for management port)
MINI DIN 6-pin connector (1 port)
4-pin (4 ports, 2 for front panel, 2 for rear panel)
DB-9 (2 ports, 1 for front panel, 1 for rear panel)
RJ-45 (2 ports)
MINI D-sub 15-pin (1 port)
Option
1+1 (redundant option), hot-swappable
8 + 7 redundant fans
Rack-mount type (1U)
425 (width) × 43 (height) × 718* (depth) mm
16 kg (20 kg)
100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1 Hz
10 to 35°C (operating), -10 to 55°C (non-operating, storage)
20 to 80% RH (no condensation)
NEC EXPRESSBUILDER supported, NEC ESMPRO provided in the
standard configuration
Specifications A-3
N8100-
1332F 1246F
2.33GHz 3.00GHz/
/4MB 4MB
1313F 1314F
2.33GHz/ 2.66GHz/
2x4MB 2x4MB
SDRAM DIMM (Low
Profile DDR2-667
Buffered Type)