NEC N8100- 1241F User Manual page 112

4-12 Configuring Your Server
Advanced Chipset Control
Option
Multimedia Timer
Intel(R) I/O AT
Wake On
LAN/PME
Wake On Ring
Wake On RTC
Alarm
IMPORTANT:
If the AC power is turned off while the Wake On LAN/PME and
Wake On Ring features are enabled, these features are disabled at
the next system boot after AC power-on. You need to press the
Power switch to boot the system. If the AC power is turned off,
Wake On LAN/PME and Wake On Ring features on power
management chip are disabled until the next DC power-on.
To use these features on Windows Server 2003, see Chapter 8
"Problems with Windows Server 2003".
Parameter
[Disabled]
Enabled
Disabled
[Enabled]
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
Enabled
Description
Specify whether the system supports
the multimedia timer feature.
Enables or disables the Intel(R)
Acceleration technology.
Specify whether the remote power-on
function through embedded NIC and
PCI devices installed in the system is
enabled or disabled.
Specify whether the remote power-on
function through a serial port is
enabled or disabled.
Specify whether the remote power-on
function by using RTC alarm feature is
enabled or disabled.
Your Setting
[ ]: Factory-set