Nec Esmpro; Off-Line Maintenance Utility; System Diagnostic Utility; Nec Dianascope - NEC N8100- 1241F User Manual

Express5800/120rg-1
Table of Contents

Advertisement

NEC ESMPRO

The NEC ESMPRO is server management software that runs on the OS. The NEC ESMPRO
includes the NEC ESMPRO Manager for the server monitoring terminal and the NEC ESMPRO
Agent for the server.
NOTE:
configuration and setups with the NEC ESMPRO, see Chapter 6.
Available functions of the NEC ESMPRO depend on the OS you install.
Ask your service representative for details.

OFF-LINE MAINTENANCE UTILITY

The Off-line Maintenance Utility is used for maintenance and fault analysis of the server. This
utility is usually used by the service representative.
Refer to Chapter 8 for details.

SYSTEM DIAGNOSTIC UTILITY

The system diagnostic utility contained in the NEC EXPRESSBUILDER is useful to detect
hardware failures. See Chapter 7 for details.

NEC DianaScope

The NEC DianaScope is a software for the remote management of the server. The NEC DianaScope
can control the managed server even if OS is not running on the managed server.
See Chapter 6 and online document in the NEC EXPRESSBUILDER.
For details of major functions of the NEC ESMPRO, system
General Description 2-23

Advertisement

Table of Contents
loading

Table of Contents