Removal - NEC N8100- 1241F User Manual

9-14 Upgrading Your Server

Removal

Take the following steps to remove a hard disk drive:
NOTE:
the DISK LED of the hard disk drive is amber before starting the
removal.
DISK LED
3.5-inch hard disk drive
SATA/SAS 3.5-inch Hot-swap Hard Disk Drive
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Unlock the front bezel with the security key, and remove the front bezel.
3.
Push the lever to unlock, and open the handle.
IMPORTANT:
installation or removal of the hard disk drive if your server is running.
If removing a failing hard disk drive, confirm the slot in which
Do not press the POWER switch during the
DISK LED
2.5-inch hard disk drive