NEC N8100- 1241F User Manual page 85

2.
While pushing the unlock button on the front of the server, hold the rails and slowly move
them toward the rear of the server.
3.
After a while, the rails are locked with clicking sound. Pull the release levers on the left
and right sides of the server toward direction indicated by an arrow in the figure, and
remove them from the server while unlocking it.
4.
Only the inner rails remain screwed to the server when the rail assemblies have been
removed.
Press this button to
unlock the server.
Pull the release lever
toward the direction
shown by the arrow to
remove the rail.
Inner rail
Setting Up Your Server 3-17