NEC N8100- 1241F User Manual page 151

9.
Select the installing Operating system.
Select "Windows" from the menu.
10.
Next, [Basic Information] wizard appears. Confirm the parameters, modify if necessary,
and then click [Next].
After that, click [Next], [Back], or [Help] on the screen to continue. Modify the
parameters each time if necessary.
IMPORTANT:
Reserve the partition to install the OS more than the minimally
required size.
If you select "Use Existing Partition" at "System Partition", the
information included in the first partition (excluding maintenance
partition) will all be formatted and deleted. The information
included in the other partition will be retained. In the figure below,
describes the partition which information will be deleted when
maintenance partition exists.
<Maintenance Partition>
You can not re-install the system with the existing partition that is
upgraded to Dynamic Disk remained. Do not select "Use Existing
Partition" at "System Partition".
If you specify other than 4095MB for the "Installing Partition", it
is necessary to convert to NTFS.
If "Use Existing Partition" at "System Partition" is selected but the
partition other than the one to install Windows Server 2003 does
not exist (excluding maintenance partition), Express Setup will
reserve the maximum area of the hard disk drive to install
Windows Server 2003.
You can not go to the next screen if the specification is incorrect.
To specify the setup parameters, the number of characters must not
exceed the limit as shown in the table below.
(Double-byte character is counted as 2 characters.)
Item
Create Users
Create Groups
Installing the Operating System with Express Setup 5-11
First Partition
Partition
Retained
Value specified
User Name
Group Name
Full Name
Explanation
Group Name
Explanation (Group Name)
Second Third
Partition
Deleted Retained
Max. number
of characters
19
20
63
47
20
47
Fourth
Partition
Retained