NEC N8100- 1241F User Manual page 189

MegaRAID Registration Server
Enables control of the MegaRAID controller via the network. Install in one of NEC
Express servers and management PCs that are connected through network. The above
components must be installed correctly for establishing the environment to use Power
Console Plus.
Power Console Plus components to be installed are different between the target servers and
management PC.
Server:
NEC Express server in which the MegaRAID controller is mounted
Install the following three components in this server:
– MegaRAID Service Monitor
– MegaRAID Server
– MegaRAID Client
Management PC:
Management PC that monitors and controls servers via the network (TCP/IP)
When managing array on Terminal Server working on Windows NT Server Version 4.0
Terminal Server Edition, prepare PC, and install Management PC component.
Management PC does not guarantee operation on Client, which used Terminal Server,
Terminal Server Emulator, WBT.
Start Power Console Plus of management PC, after the Power On machine that installed
"Server" and "Management Server".
Install the following component in this PC:
– MegaRAID Client
Management server:
Machine that manages all servers that are monitored and controlled by management PCs
Install the following component in one of the servers or management PCs:
– MegaRAID Registration Server
Installing and Using Utilities 6-21