NEC N8100- 1241F User Manual page 170

6-2 Installing and Using Utilities
NEC EXPRESSBUILDER
NEC EXPRESSBUILDER has some maintenance utilities and management software. NEC
EXPRESSBUILDER also helps you to install NOS (Windows Server 2003).
NOTE: Before using NEC EXPRESSBUILDER for initial setup,
complete the hardware configuration.
NEC EXPRESSBUILDER has two executing modes depending on your operating environments.
One is for using on Windows system, and the other is booted from NEC EXPRESSBUILDER CD.
DOS-based with local console
The following menu appears on the local display after booting from NEC
EXPRESSBUILDER CD. You can install NOS or run the diagnostic program, and so on.
NOTE: A mouse can't be used when EXPRESSBUILDER is operated
with the remote KVM console. Use a keyboard.
DOS-based with remote console
Used to set up the server from the management workstation by accessing the server over
the network or via serial port B.
NOTE: The "CSL_LESS.CFG" file is required to run this program.
Refer to " NEC EXPRESSBUILDER for DOS-based with Remote
Console" described later in this chapter for detail.