Table of Contents
Advertisement
9-22 Upgrading Your Server
DRIVE COVER
Open the drive cover when installing/removing a fan assembly, processor, and backup file device or
reconnecting an internal cable.
Removal
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Slide the drive cover toward the rear of the server while pressing the lock button on the cover.
4.
Lift off the drive cover from the server.
Installation
When installing the drive cover, confirm that the tab of the cover is securely inserted into the slot in
the server frame. Slide the drive cover toward the rear of the server. The drive cover is locked when
a distinct "click" is heard. At this time, check the release button for normal state.
NOTE: The system must be operated with the drive cover installed to
ensure proper cooling.
Advertisement
Table of Contents
Troubleshooting
