System Security - NEC N8100- 1241F User Manual

System Security

To help prevent unauthorized entry or use of the system, the system includes a full lockable front
bezel and Server Management software that monitors the front bezel intrusion switch.
Security with Mechanical Locks and Monitoring
To unlock the bezel, insert the key in the lock and turn the lock counterclockwise until it stops
(about a quarter turn). The bezel is now unlocked and can be opened again.
To lock the bezel, insert the key in the lock. Turn the lock clockwise until it stops (about a quarter
turn). The bezel is now locked and cannot be opened.
Software Locks via the BIOS SETUP Utility
The BIOS SETUP Utility provides a number of security features to prevent unauthorized or
accidental access to the system. Once the security measures are enabled, you can access the system
only after you enter the correct password(s). For example:
Mask the power switch function after the power-on.
Set and enable a supervisor password.
Set and enable a user password.
Disable access to the boot sector of the operating system hard disk drive.
General Description 2-21