Running Lsi Logic Software Raid Setup Utility - NEC N8100- 1241F User Manual

Running LSI Logic Software RAID Setup Utility

1.
When the following screen appears after you have powered on the server, press Esc.
The POST screen appears.
2.
Check the description as shown below on the POST screen, then press Ctrl + M.
LSI Logic Software RAID Setup Utility starts.
LSI Logic SoftwareRAID BIOS Version xxxxxx
LSI Logic MPT RAID Found at PCI Bus No:xx Bev No:xx
Scanning for port 00 Responding xxxxxxxx xxxxMB
Standard FW xxx DRAM=128MB(SDRAM)
xx Logical drive(s) Configured
Press <Ctrl><M> to Run LSI Logic Software RAID Setup Utility
LSI Logic Software RAID Configuration Utility TOP Menu (Management Menu)
Configuring Your Server 4-25