Installing Service Pack; Updating System; Re-Installing To The Hard Disk Which Has Been Upgraded To Dynamic Disk; Manual Installation When N8103-80F Keeps Connection - NEC N8100- 1241F User Manual

Installing Service Pack

You can install the Service Pack on the server. When the Service Pack is not attached to your system,
prepare it by yourself.

Updating System

If you modified the Windows system, execute "Update Express5800 system" in Master Control
Menu.
Re-installing to the Hard Disk which has been upgraded to Dynamic
Disk
If you want to leave the existing partition when installing the system on the hard disk upgraded to
Dynamic Disk, note the following issue:
Do not select the partition that OS had been installed as the partition to install the OS
newly.
Select "Use the current File System" for the format of OS partition.

Manual Installation when N8103-80F Keeps Connection

If you keep those controllers connecting during installation process, pop-up messages may appear.
This does not affect on system behavior. Click [YES] and continue the installation. Follow the
message hereafter.

Mounting MO Device

Do not mount an MO device on your server during the Windows installation.

About Removable Media

Do not set removable media, such as DAT, into the device mounted on your server during the OS
installation.

Floppy Disk Drive

The internal floppy disk drive is not included in your system at the standard configuration. Prepare
the optional USB floppy disk drive if necessary.
Installing Windows Server 2003 x64 Editions D-3