NEC N8100- 1241F User Manual page 256

9-16 Upgrading Your Server
2.5-inch SAS Hard Disk Drive
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Unlock the front bezel with the security key, and remove the front bezel.
3.
Push the lever to unlock, and open the handle.
IMPORTANT:
installation or removal of the hard disk drive if your server is running.
4.
Firmly hold the handle and hard disk drive, and pull out the hard disk drive.
5.
If using the server with the hard disk drive removed, install the dummy block in the
vacant slot to ensure the cooling efficiency.
6.
Install the front bezel you removed in step 2.
Do not press the POWER switch during the