Table of Contents
Advertisement
2-30 General Description
POST Error Messages
When POST detects an error, it displays an error message on the display unit screen. See Chapter 8
for POST error codes.
IMPORTANT:
consulting with your service representative. Alarm messages are useful
information for maintenance.
Power Off
Follow the procedure below to power off the server. If the power cord of the server is connected to a
UPS, refer to the manual that comes with the UPS or the manual for the application that controls the
UPS.
IMPORTANT:
the server.
1.
Shutdown the OS.
2.
Press the POWER switch on the front of the server.
The POWER LED goes off.
3.
Power off peripheral devices.
NOTE:
not select "Standby" in Windows shutdown menu.
Take a note on the messages displayed before
Always allow POST to complete before turning off
The standby feature of Windows Server is not available. Do
Advertisement
Table of Contents
Troubleshooting
