NEC N8100- 1241F User Manual page 217

On-screen message
Memory C-Err XX
Memory U-Err XX
PCI Bus PERR XX
PCI Bus SERR XX
Prepare To Boot
Messages displayed on lower line (BMC message)
When the following messages are displayed on the virtual LCD, restart your server by turning off
and on. If an error still occurred, contact your service representative for maintenance.
On-screen message
240VA Power Down
BB +1.5v Alm XX
BB +1.8v Alm XX
BB +3.3v Alm XX
BB +5.0v Alm XX
BB +12v Alm XX
BB P_Vtt Alm XX
BB Temp1 Alm XX
DUMP Request !
OS shutdown Alm
Power On Cnt Alm
Power Unit 1 Alm
Power Unit 2 Alm
Proc Missing
Proc 1 T-Trip
Proc 2 T-Trip
Proc1 Therm % XX
Proc2 Therm % XX
Proc1 VccpAlm XX
Proc2 VccpAlm XX
Processor 1 IERR
Description
A correctable error frequently occurs
in DIMM #XX.
An uncorrectable error has occurred in
DIMM #XX.
A PERR has occurred in the PCI bus
XX.
A SERR has occurred in the PCI bus
XX.
POST completes normally.
Description
Power supply failure occurred.
Voltage alarm occurred on the mother board.
XX=09: high voltage (fetal)
XX=07: high voltage (warning)
XX=02: low voltage (warning)
XX=00: low voltage (fetal)
Mother board thermal error occurred.
XX=09: high voltage (fetal)
XX=07: high voltage (warning)
XX=02: low voltage (warning)
XX=00: low voltage (fetal)
Dump switch is pressed.
OS shutdown alarm occurred.
Power supply failure occurred.
Power unit #1 Failure occurred.
Power unit #2 Failure occurred.
Processor is not found.
Thermal Trip occurred on processor #1 or #2. The system is forcibly
turned off.
Processor #1 or #2 thermal error occurred.
XX=09: high temperature (fetal)
XX=07: high temperature (warning)
XX=02: low temperature (warning)
XX=00: low temperature (fetal)
Voltage alarm occurred on processor #1 or #2.
XX=09: high voltage (fetal)
XX=07: high voltage (warning)
XX=02: low voltage (warning)
XX=00: low voltage (fetal)
IERR occurred on processor #1 or #2.
Troubleshooting 8-11
Action
Contact your service
representative.
This is not an error.