DRIVE COVER
When attaching the drive cover, make sure that the drive cover tab is securely inserted into the
server frame, and slide the drive cover towards the back.
Removal
1.
See page 9-4 to prepare.
2.
Pull the server out of the rack (as described on page 9-4).
3.
Slide the drive cover toward the rear of the server while pressing the lock buttons on the cover.
4.
Lift off the drive cover from the server.
Installation
When installing the drive cover, confirm that the tab of the drive cover is securely inserted into the
slots in the server frame. Slide the drive cover toward the rear of the server. The drive cover is
locked when a distinct "click" is heard. At this time, check the lock buttons for normal state.
NOTE:
ensure proper cooling.
The system must be operated with the top cover installed to
Upgrading Your Server 9-25