Overview Of Installation And Removal - NEC R120d-1E N8100-1955F User Manual

Hide thumbs Also See for R120d-1E N8100-1955F:
Table of Contents

Advertisement

Chapter 2 Preparations
1.3

Overview of Installation and Removal

Install/remove components by using the following procedure.
Installing/removing internal components except for Hard Disk Drives should be done after dismounting the
server from the rack. It is recommended that more than one person removes the server from the rack.
1. If the server is mounted on a rack, use the UID switch to identify the target server.
Refer to Chapter 2 (1.4 Confirming Servers (UID Switch)).
2. Remove the front bezel if applicable.
Refer to Chapter 2 (1.5 Removing Front Bezel).
3. If the server is ON, turn it off.
Refer to Chapter 3 (6. Turning Off the Server).
4. Disconnect the power cord from the outlet and the server.
5. You need to pull out the server from rack when installing or removing the following component:
Internal flash memory, TPM Kit, processor, DIMM, extra battery for RAID controller, PCI card,
additional HDD cage, optical disk drive
If you are going to install a hard disk drive only, go to step 10.
6. Remove the top cover.
Refer to Chapter 2 (1.6 Removing Top Cover).
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
Do not drop the server
Do not leave the server pulled out of the rack
Replace the cover after installing components
Beware of high temperatures
Do not get your fingers caught when installing components
Important
After disconnecting the power cord from the server, wait for at least 5
seconds before continuing to work because the components on the
motherboard might still be operating for 3 to 4 seconds even after the power
cord was disconnected.
Important
Do not leave the server open on the rack.
Express5800/R120d-1E User's Guide
1. Installing Internal Optional Devices
CAUTION
49

Advertisement

Table of Contents
loading

Table of Contents