Raid System Configuration; Running The Lsi Software Raid Configuration Utility - NEC Express 5800 Series Maintenance Manual

Chapter 2 Useful Features
5.

RAID System Configuration

This section describes the RAID configuration utility, the LSI Software RAID Configuration Utility.
5.1

Running the LSI Software RAID Configuration Utility

To run LSI Software RAID Configuration Utility, press <Ctrl> + <M> keys or <Enter> key while the following
message appears on the POST screen.
Press Ctrl-M or Enter to run LSI Software RAID Configuration Utility
LSI Software RAID Configuration Utility Ver x.xx mm dd, yyyy
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
*1: In the above figure, x of LSI Software RAID Configuration Utility Verx.xx indicates the utility
version.
*2: mm dd, yyyy indicates the date when the utility was created.
*3: z of BIOS Version z.zz.zzzzzzzz indicates the version of the LSI Software RAID BIOS.
BIOS Version z.zz.zzzzzzzzz
Configure VD(s)
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
5. RAID System Configuration
101